POCKET PULSE

Art. nr. 305
SAP 60947

Art. nr. 305
SAP 60947

Inverter single-phase synergic power source for MIG-MAG welding, both short and pulsed, with 2-roller Cebora wire feed unit and a weight of 13.5 kg only. The power source is factory fitted with 37 synergic programs (mild steel Ø 0.6 / 0.8 / 0.9 / 1.0 mm, stainless steel 0.8 / 0.9 mm, Aluminium 0.9 / 1.0 mm, CuSi3% 0.8 / 0.9 mm as well as for flux cored wire Ø 0.9 mm).
The LCD panel allows the operator to read, on three lines, wire and gas type, current and thickness, voltage and wire speed.
It is a specially versatile power source, suitable for various applications, especially repairs, maintenance and basic car body repairs, marked out by a low electrical input (PFC).
An optional dedicated transport trolley (art. 1653), particularly compact and handy, is available too.
Complies with EN 61000-3-12.
The power source can also be powered by motor-driven generators of adequate power (min. 6 KVA).

So, in a little more than 13 kg, here is a welding machine with dozens of synergic programs already included, to allow an optimal machine setting also to the inexperienced operators, yet capable to offer to the more expert ones the possibility to effect a fine tuning on every single parameter to make it perfectly match the different and particular needs.

The wide and bright LCD display is a precious interface for the user, who can view the machine setting in real time.

The pulsed MIG function, factory fitted, allows to obtain high quality welds even on “difficult” materials and thin thicknesses, thanks to a limited heat transfer (with a consequently lower distortion of the workpiece), a higher penetration, an accurate control of the welding arc, the absence of spatter and an extraordinary aesthetic result.

Versatility is one of the salient notes of the Pocket Pulse that, thanks to its particular characteristics of weight and size, to the rich range of functions and to its power (185A at 20% and 110A at 100%) is suitable for both the “do-it-yourself” type use (the input of 2.7 kvA at 100% makes it possible to use the machine even in a house environment) and for professional use in several sectors (body repair, metal fabrication, on site maintenance – even outdoors, using flux cored wires without shielding gas).

Teknisk Info

Video