WIN TIG AC-DC 180M

Art. nr. ART 558
SAP 61375
BESTILLINGSVARE – PRIS PÅ FORESPØRSEL

Art. nr. ART 558
SAP 61375

WIN TIG AC-DC 180 M (art. 558) is a single-phase power source with inverter technology for TIG and MMA welding, (with the exception of AWS6010 cellulosic electrodes) mainly designed for maintenance and repair works, as well as small production.

Fitted with a new LCD color display and with a clear and simple operative menu for an easy and quick adjustement of functions and and parameters, is supplied with the following new TIG welding processes / functions:

  • Extra Pulse welding process – welding process with concentrated arc optimized for welding and spot welding
  • APC TIG welding process (Active Power Control) which allows to obtain colder welding beads
  • AC+DC TIG welding process suitable for the welding of aluminum and its alloys; with the DC component in the process we obtain more penetrated welds and higher welding speeds with less deformation of the workpiece
  • XP TIG welding process (extra power) suitable for welding thin and corner sheets
  • AC MMA welding process suitable for welding of electrodes on magnetized sheets. It is normally used for maintenance work and in all cases where a high penetration welding is not required
  • “EVO lift” arc ignition – through this function, a welding point is exactly realized where desired
  • “EVO ST” arc ignition – this function speeds up the shaping of the bath both in spot welding and upon the start of the welding process
  • Spot and intermittence function
  • WIZ (Wizard) function for set-up – for a quick setting of the power source
  • Gas test function
  • Pulsed arc with continuous adjustment from 0.16 Hz to 2.5 KHz

Can work with a variety of remote control devices, foot control (art. 193), remote control (art. 187+1192) or up-down control on torch (art. 1262).

The protection gases to be used are argon, argon/helium, argon/hydrogen. Can be saved up to 9 welding programs (JOB).

The compliance with EN 61000-3-12 standards assures a substantial energy saving as well as a wide tolerance on the supply voltage (+15%/-20%).

The power source can also be powered by motor generators of adequate power (min. 8 kVA).

Teknisk info

Art. 558 Specifications S CE
TIG MMA
missing image file 230V 50/60 Hz
+ 15% / -20%
Single phase input
missing image file 16 A Fuse rating (slow blow)
missing image file 4,4 KVA 25%
2,5 KVA 60%
2,2 KVA 100%
4,4 KVA 30%
3,3 KVA 60%
3,0 KVA 100%
Input power
campo di regolazione corrente 5A ÷ 180A 10A ÷ 130A Current adjustment range
missing image file 180A 25%
110A 60%
100A 100%
130A 30%
100A 60%
90A 100%
Duty Cycle (10 min.40°C)
According to IEC 60974.1
missing image file IP 23 S Protection class
missing image file 17,5 Kg Weight
missing image file 207x500x411H Dimensions mm